ASTM A213/A213M-08a
- standard by ASTM International, 10/15/2008
- Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- Category: ASTM
$67.00
$34.00
Full Description
1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2.
1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
TABLE 1 Chemical Composition Limits, %A, for Low Alloy Steel
Grade | UNS Designation | Composition, % | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon | Manga- nese |
Phospho- rus |
Sul- fur |
Silicon |
Nickel | Chromium | Molybdenum | Vana- dium |
Boron | Niobium | Nitrogen | Aluminum | Tungsten | Other Elements | ||
T2 | K11547 | 0.10-0.20 | 0.30-0.61 | 0.025 | 0.025B | 0.10-0.30 | ... | 0.50-0.81 | 0.44-0.65 | ... | ... | ... | ... | ... | ... | ... |
T5 | K41545 | 0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 | ... | 4.00-6.00 | 0.45-0.65 | ... | ... | ... | ... | ... | ... | ... |
T5b | K51545 | 0.15 | 0.30-0.60 | 0.025 | 0.025 | 1.00-2.00 | ... | 4Product Details
Document History ASTM A213/A213M-22aASTM A213/A213M-21bASTM A213/A213M-21aASTM A213/A213M-21ASTM A213/A213M-19ASTM A213/A213M-18bASTM A213/A213M-18aASTM A213/A213M-18ASTM A213/A213M-17ASTM A213/A213M-15cASTM A213/A213M-15aASTM A213/A213M-15ASTM A213/A213M-14ASTM A213/A213M-13ASTM A213/A213M-11aASTM A213/A213M-09bASTM A213/A213M-09ASTM A213/A213M-08aASTM A213/A213M-08ASTM A213/A213M-07aASTM A213/A213M-07ASTM A213/A213M-06ae1ASTM A213/A213M-06aASTM A213/A213M-05cASTM A213/A213M-05bASTM A213/A213M-05aASTM A213/A213M-05ASTM A213/A213M-04bASTM A213/A213M-04ASTM A213/A213M-03cASTM A213/A213M-03bASTM A213/A213M-03aASTM A213/A213M-03ASTM A213/A213M-01aASTM E2167-01(2008)Standard Guide for Selection and Use of Stone Consolidants (Withdrawn 2017).. $29.00 $58.00 ASTM E1356-08Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning C.. $25.00 $50.00 |