ASTM A370-14
- standard by ASTM International, 05/15/2014
- Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- Category: ASTM
$91.00
$46.00
Full Description
1.1 These test methods2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.
1.2 The following mechanical tests are described:
| Sections |
Tension | 6 to 14 |
Bend | 15 |
Hardness | 16 |
Brinell | 17 |
Rockwell | 18 |
Portable | 19 |
Impact | 20 to 29 |
Keywords | 30 |
1.3 Annexes covering details peculiar to certain products are appended to these test methods as follows:
| Annex |
Bar Products | A1.1 |
Tubular Products | Annex A2 |
Fasteners | Annex A3 |
Round Wire Products | Annex A4 |
Significance of Notched-Bar Impact Testing | Annex A5 |
Converting Percentage Elongation of Round Specimens to | Annex A6 |
Testing Multi-Wire Strand | Annex A7 |
Rounding of Test Data | Annex A8 |
Methods for Testing Steel Reinforcing Bars | Annex A9 |
Procedure for Use and Control of Heat-Cycle Simulation | Annex A10 |
1.4 The values stated in inch-pound units are to be regarded as the standard.
1.5 When this document is referenced in a metric product specification, the yield and tensile values may be determined in inch-pound (ksi) units then converted into SI (MPa) units. The elongation determined in inch-pound gauge lengths of 2 or 8 in. may be reported in SI unit gauge lengths of 50 or 200 mm, respectively, as applicable. Conversely, when this document is referenced in an inch-pound product specification, the yield and tensile values may be determined in SI units then converted into inch-pound units. The elongation determine
Product Details
- Published:
- 05/15/2014
- Number of Pages:
- 50
- File Size:
- 1 file , 1.1 MB
- Redline File Size:
- 2 files , 2.6 MB
- Note:
- This product is unavailable in Russia, Ukraine, Belarus
Document History
ASTM A370-22
ASTM A370-20
ASTM A370-19e1
ASTM A370-19
ASTM A370-17a
ASTM A370-17
ASTM A370-16
ASTM A370-15
ASTM A370-14
ASTM A370-13
ASTM A370-94
ASTM A370-68
ASTM A370-12a
ASTM A370-12
ASTM A370-11a
ASTM A370-10
ASTM A370-09ae1
ASTM A370-09a
ASTM A370-08b
ASTM A370-08a
ASTM A370-08
ASTM A370-97a
ASTM A370-02
ASTM A370-07a
ASTM A370-06
ASTM A370-05
ASTM A370-03a
ASTM A370-02e1
ASTM A370-01
ASTM B894-10
Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings..
$30.00 $60.00
ASTM B23-00(2010)
Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")..
$26.00 $52.00
ASTM E1957-04(2010)
Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers..
$25.00 $50.00