• ASTM A735/A735M-12

ASTM A735/A735M-12

  • standard by ASTM International, 05/01/2012
  • Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service (
  • Category: ASTM

$52.00 $26.00

Full Description

1.1 This specification covers low-carbon manganese-molybdenum-columbium alloy steel plates for piping components and welded pressure vessels.

1.2 Four different classes are covered, which provide various tensile strength properties. A Charpy V-notch energy absorption requirement of 20 ft·lbf [27J] at 50°F [45°C] is specified for all grades.

1.2.1 Classes 1 and 2 provide minimum yield strength levels of 65 ksi [450 MPa] and 70 ksi [485 MPa] respectively. Both classes can be provided in the as-rolled condition or in the quenched-and-tempered condition.

1.2.2 Class 3 provides a minimum yield strength level of 75 ksi [515 MPa]. This grade can be provided in the as-rolled and precipitation heat-treated condition or in the quenched-and-tempered condition.

1.2.3 Class 4 provides a yield strength level of 80 ksi [550 MPa] in the as-rolled and precipitation heat-treated condition.

1.3 Current practice limits plate thickness furnished under this specification. The individual manufacturer should be consulted on size and thickness limitations.

1.4 Welding procedures are of fundamental importance and must be such as not to adversely affect the properties of the material, especially in the heat-affected zone. It is presupposed that welding procedures will be suitable for the materials being welded.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Product Details

Published:
05/01/2012
Number of Pages:
3
File Size:
1 file , 67 KB
Redline File Size:
2 files , 130 KB
Note:
This product is unavailable in Russia, Ukraine, Belarus

Document History

ASTM A735/A735M-12

ASTM A735/A735M-03(2007)

ASTM A735/A735M-03

ASTM A182/A182M-16

ASTM A182/A182M-16

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittin..

$35.00 $69.00

ASTM G131-96(2016)

ASTM G131-96(2016)

Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques..

$29.00 $58.00

ASTM F2170-16

ASTM F2170-16

Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probe..

$29.00 $58.00

ASTM A508/A508M-16

ASTM A508/A508M-16

Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for..

$29.00 $58.00