ASTM A962/A962M-23a

1.1 This specification covers a group of common requirements that shall apply to carbon, alloy, stainless steel, and nickel alloy bolting under any of the following ASTM Specifications (or under any other ASTM Specifications that invoke this specification or portions thereof):

1.2 In case of conflict, the requirements of the individual product specification shall prevail over those of this specification.

1.3 Fasteners are a wide-ranging classification that includes screws, bolts, nuts, washers, stud bolts, rivets, powder-actuated studs, staples, tacks, and pins. Bolting, which is composed of bolting materials, such as rods, bars, flats, and forgings, which are subsequently manufactured into bolting components, are a special sub-group of fasteners. Bolting materials and components have designated compositions and specific properties intended for applications in aggressive service where commercial generic fasteners may not be suitable or have insufficient fitness for purpose under certain conditions. These conditions include cryogenic or high temperature service, or excessive vibration, impact, or shock. To further address any other special service conditions where bolting is intended for use, additional requirements may be specified by mutual agreement between the purchaser and supplier.

1.4 Supplementary requirements are provided for use at the option of the purchaser. The supplementary requirements only apply when specified individually by the purchaser in the purchase order or contract.

1.5 This specification is expressed in both inch-pound units and in SI units. Unless the purchase order or contract specifies the applicable "M" specification designation (SI units) the inch-pound units shall apply. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the Wor

Product Details

Published:

05/15/2023

Number of Pages:

14

File Size:

1 file , 410 KB

Redline File Size:

2 files , 600 KB

Note:

This product is unavailable in Russia, Ukraine, Belarus

Document History

ASTM A962/A962M-23a

ASTM A962/A962M-23

ASTM A962/A962M-22

ASTM A962/A962M-18

ASTM A962/A962M-17

ASTM A962/A962M-16b

ASTM A962/A962M-16a

ASTM A962/A962M-16

ASTM A962/A962M-15

ASTM A962/A962M-14a

ASTM A962/A962M-14

ASTM A962/A962M-13b

ASTM A962/A962M-12

ASTM A962/A962M-11a

ASTM A962/A962M-11

ASTM A962/A962M-10

ASTM A962/A962M-07b

ASTM A962/A962M-07a

ASTM A962/A962M-07

ASTM A962/A962M-06

ASTM A962/A962M-04a

ASTM A962/A962M-04

ASTM A962/A962M-01a

ASTM A962/A962M-00