ASTM C1242-22c
- standard by ASTM International, 09/14/2022
- Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- Category: ASTM
$98.00
$49.00
Full Description
1.1 This guide covers the categories of anchors and anchoring systems and discusses the design principles to be considered in selecting anchors or systems that will resist gravity loads and applied loads.
1.2 This guide sets forth basic requirements for the design of stone anchorage and provides a practical checklist of those design considerations.
1.3 This guide pertains to:
1.3.1 The anchoring of stone panels directly to the building structure for support,
1.3.2 The anchoring of stone panels to subframes or to curtainwall components after these support systems are attached to the building structure,
1.3.3 The anchoring of stone panels to subframes or to curtainwall components with stone cladding preassembled before these support systems are attached to the building structure, and
1.3.4 The supervision and inspection of fabrication and installation of the above.
1.4 Observe all applicable regulations, specific recommendations of the manufacturers, and standards governing interfacing work.
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
FIG. 1 Rod and Plug Anchor
FIG. 2 Adhesive Embedded Threaded Anchor
FIG. 3 Point Loading Prevention
FIG. 3 Point Loading Prevention (continued)
FIG. 4 Disc Anchor
FIG. 5 Combined Anchor
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (See Tables 1 and 2.)
1.7 This international standard w
Product Details
- Published:
- 09/14/2022
- Number of Pages:
- 23
- File Size:
- 1 file , 1.2 MB
- Redline File Size:
- 2 files , 2.9 MB
- Note:
- This product is unavailable in Russia, Ukraine, Belarus
Document History
ASTM C1242-22c
ASTM C1242-22b
ASTM C1242-22a
ASTM C1242-22
ASTM C1242-21
ASTM C1242-20
ASTM C1242-19a
ASTM C1242-18a
ASTM C1242-18
ASTM C1242-15a
ASTM C1242-15
ASTM C1242-14a
ASTM C1242-14
ASTM C1242-12ae1
ASTM C1242-11
ASTM C1242-10
ASTM C1242-02
ASTM C1242-05
ASTM C1242-04a
ASTM C1242-04
ASTM C1242-03a
ASTM C1242-03
ASTM C1242-02a
ASTM C1242-01
ASTM D2983-15
Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer..
$34.00 $67.00
ASTM D1356-15a
Standard Terminology Relating to Sampling and Analysis of Atmospheres..
$33.00 $65.00
ASTM F839-15
Standard Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containe..
$21.00 $42.00
