ASTM D1742-06(2013)
- standard by ASTM International, 12/01/2013
- Standard Test Method for Oil Separation from Lubricating Grease During Storage
- Category: ASTM
$60.00
$30.00
Full Description
1.1 This test method covers the determination of the tendency of a lubricating grease to separate oil during storage in both normally filled and partially filled containers.
1.2 This test method is not suitable for greases softer than NLGI No. 1 grade.
![Pressure Bleeding Test Cell A](http://www.astm.org/HTTP/IMAGES/2962.gif)
1.3 The values stated in SI units are to be regarded as standard, except for the dimensions in Fig. 2 and Fig. 5, where inch-pound units are standard.
| |||||||
in. | mm | in. | mm | in. | mm | in. | mm |
|
|
|
|
|
|
|
|
0.0021 | 0.053 | 15/8 | 41.3 | 0.500 | 12.70 | 47/16 | 112.7 |
0.0029 | 0.074 | 1³/4 | 44.4 | 0.510 | 12.95 | 41/2 | 114.3 |
0.010 | 0.25 | 2 | 50.8 | 0.520 | 13.20 | 411/16 | 119.1 |
1/16 | 1.59 | 21/2 | 63.5 | 5/8 | 15.87 | 4³/4 | 120.6 |
1/8 | 3.17 | 311/16 | 93.7 | ³/4 | 19.05 | 426/32 | 123.03 |
³/16 | 4.76 | 41/8 | 104.8 | 1 | 25.4 | 51/4 | 133.3 |
1/4 | 6.35 | 4.360 | 110.74 | 11/4 | 31.8 | 6 | 152.4 |
5/16 | 7.94 | 4.365 | 110.87 | 1³/8 | 34.9 | 61/2 | 165.1 |