• ASTM D2887-13

ASTM D2887-13

  • standard by ASTM International, 05/01/2013
  • Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • Category: ASTM

$86.00 $43.00

Full Description

1.1 This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538°C (1000°F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55.5°C (100°F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature.

Note 1-Since a boiling range is the difference between two temperatures, only the constant of 1.8°F/°C is used in the conversion of the temperature range from one system of units to another.

1.1.1 Procedure A (Sections )-Allows a larger selection of columns and analysis conditions such as packed and capillary columns as well as a Thermal Conductivity Detector in addition to the Flame Ionization Detector. Analysis times range from 14 to 60 min.

1.1.2 Procedure B (Sections )-Is restricted to only 3 capillary columns and requires no sample dilution. In addition, Procedure B is used not only for the sample types described in Procedure A but also for the analysis of samples containing biodiesel mixtures B5, B10, and B20. The analysis time, when using Procedure B (Accelerated D2887), is reduced to about 8 min.

1.2 This test method is not to be used for the analysis of gasoline samples or gasoline components. These types of samples must be analyzed by Test Method .

1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Product Details

Published:
05/01/2013
Number of Pages:
24
File Size:
1 file , 480 KB
Redline File Size:
2 files , 1.2 MB
Note:
This product is unavailable in Russia, Ukraine, Belarus

Document History

ASTM D2887-22

ASTM D2887-19ae2

ASTM D2887-19ae1

ASTM D2887-19a

ASTM D2887-19e1

ASTM D2887-19

ASTM D2887-16

ASTM D2887-15e1

ASTM D2887-15

ASTM D2887-14

ASTM D2887-13

ASTM D2887-12

ASTM D2887-08

ASTM D2887-06a

ASTM D2887-06

ASTM D2887-01a

ASTM D2887-03

ASTM D2887-02

ASTM D2887-99

ASTM D396-98

ASTM D396-98

Standard Specification for Fuel Oils..

$31.00 $62.00

ASTM C136-96a

ASTM C136-96a

Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates..

$30.00 $60.00

ASTM D3257-97

ASTM D3257-97

Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography..

$30.00 $60.00

ASTM D6684-01

ASTM D6684-01

Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment ..

$25.00 $50.00