• ASTM D2887-16

ASTM D2887-16

  • standard by ASTM International, 04/01/2016
  • Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • Category: ASTM

$86.00 $43.00

Full Description

1.1 This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538 °C (1000 °F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55.5 °C (100 °F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature.

Note 1: Since a boiling range is the difference between two temperatures, only the constant of 1.8 °F/°C is used in the conversion of the temperature range from one system of units to another.

1.1.1 Procedure A (Sections 6 - 14)-Allows a larger selection of columns and analysis conditions such as packed and capillary columns as well as a Thermal Conductivity Detector in addition to the Flame Ionization Detector. Analysis times range from 14 min to 60 min.

1.1.2 Procedure B (Sections 15 - 23)-Is restricted to only 3 capillary columns and requires no sample dilution. In addition, Procedure B is used not only for the sample types described in Procedure A but also for the analysis of samples containing biodiesel mixtures B5, B10, and B20. The analysis time, when using Procedure B (Accelerated D2887), is reduced to about 8 min.

1.2 This test method is not to be used for the analysis of gasoline samples or gasoline components. These types of samples must be analyzed by Test Method D7096.

1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Product Details

Published:
04/01/2016
Number of Pages:
32
File Size:
1 file , 830 KB
Redline File Size:
2 files , 2.2 MB
Note:
This product is unavailable in Russia, Ukraine, Belarus

Document History

ASTM D2887-22

ASTM D2887-19ae2

ASTM D2887-19ae1

ASTM D2887-19a

ASTM D2887-19e1

ASTM D2887-19

ASTM D2887-16

ASTM D2887-15e1

ASTM D2887-15

ASTM D2887-14

ASTM D2887-13

ASTM D2887-12

ASTM D2887-08

ASTM D2887-06a

ASTM D2887-06

ASTM D2887-01a

ASTM D2887-03

ASTM D2887-02

ASTM D2887-99

ASTM A395/A395M-99(2022)

ASTM A395/A395M-99(2022)

Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Tem..

$29.00 $57.00

ASTM B131-22

ASTM B131-22

Standard Specification for Copper Alloy Bullet Jacket Cups..

$29.00 $57.00

ASTM E136-22

ASTM E136-22

Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 75..

$32.00 $63.00

ASTM F3127-22

ASTM F3127-22

Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices..

$32.00 $63.00