ASTM D7566-20c
- standard by ASTM International, 12/01/2020
- Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- Category: ASTM
$89.00
$45.00
Full Description
1.1''This specification covers the manufacture of aviation turbine fuel that consists of conventional and synthetic blending components.
1.2''This specification applies only at the point of batch origination, as follows:
1.2.1''Aviation turbine fuel manufactured, certified, and released to all the requirements of Table 1 of this specification (D7566), meets the requirements of Specification D1655 and shall be regarded as Specification D1655 turbine fuel. Duplicate testing is not necessary; the same data may be used for both D7566 and D1655 compliance. Once the fuel is released to this specification (D7566) the unique requirements of this specification are no longer applicable: any recertification shall be done in accordance with Table'''1 of Specification D1655.
1.2.2''Field blending of synthesized paraffinic kerosine (SPK) blendstocks, as described in Annex A1 (FT SPK), Annex A2 (HEFA SPK), Annex A3 (SIP), Annex A4 synthesized paraffinic kerosine plus aromatics (SPK/A), Annex A5 (ATJ), Annex A6 catalytic hydrothermolysis jet (CHJ), or Annex A7 (HC-HEFA SPK) with D1655 fuel (which may on the whole or in part have originated as D7566 fuel) shall be considered batch origination in which case all of the requirements of Table 1 of this specification (D7566) apply and shall be evaluated. Short form conformance test programs commonly used to ensure transportation quality are not sufficient. The fuel shall be regarded as D1655 turbine fuel after certification and release as described in 1.2.1.
1.2.3''Once a fuel is redesignated as D1655 aviation turbine fuel, it can be handled in the same fashion as the equivalent refined D1655 aviation turbine fuel.
1.3''This specification defines the minimum property requirements for aviation turbine fuel that contain synthesized hydrocarbons and lists acceptable additives for use in civil operated engines and aircrafts. Specification D7566 is directed at civil applications, and maintained as such, but may be adopted for military, government, or other specialized uses.
1.4''This specification can be used as a standard in describing the quality of aviation turbine fuel from production to the aircraft. However, this specification does not define the quality assurance testing and procedures necessary to ensure that fuel in the distribution system continues to comply with this specification after batch certification. Such procedures are defined elsewhere, for example in ICAO'''9977, EI/JIG Standard'''1530, JIG'''1, JIG'''2, API'''1543, API'''1595, and ATA-103.
1.5''This specification does not include all fuels satisfactory for aviation turbine engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.
1.6''While aviation turbine fuels defined by Table 1 of this specification can be used in applications other than aviation turbine engines, requirements for such other applications have not been considered in the development of this specification.
1.7''Synthetic blending components, synthetic fuels, and blends of synthetic fuels with conventional petroleum-derived fuels in this specification have been evaluated and approved in accordance with the principles established in Practice D4054.
Product Details
- Published:
- 12/01/2020
- Number of Pages:
- 38
- File Size:
- 1 file , 510 KB
- Redline File Size:
- 2 files , 800 KB
- Note:
- This product is unavailable in Russia, Ukraine, Belarus
Document History
ASTM D7566-22
ASTM D7566-21
ASTM D7566-20c
ASTM D7566-20b
ASTM D7566-20a
ASTM D7566-18a
ASTM D7566-18
ASTM D7566-16b
ASTM D7566-16a
ASTM D7566-16
ASTM D7566-15c
ASTM D7566-15a
ASTM D7566-15
ASTM D7566-14a
ASTM D7566-13
ASTM D7566-12a
ASTM D7566-12
ASTM D7566-11a
ASTM D7566-11
ASTM D7566-10
ASTM D6918-03
Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition..
$25.00 $50.00
ASTM E1507-98(2003)
Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading ..
$33.00 $65.00
ASTM E2296-03
Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgi..
$25.00 $50.00