ASTM F2376-21

1.1.1''Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction.

1.1.2''The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major modification shall meet the standard requirements in existence at the time of the construction.

1.2.1''The flume,

1.2.2''The water-circulation system,

1.2.3''The starting platform with associated means of access and egress,

1.2.4''The structural supports,

1.2.5''Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and

1.2.6''Means of slide termination.

1.3.1''Any water slides installed in private residences,

1.3.2''Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes),

1.3.3''Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,

1.3.4''Lazy river type attractions operating at constant elevation, constructed in the ground,

1.3.5''Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-19 for the requirements of these types of water slides), and

1.3.6''Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649, parts 1 through -7).

1.4.1''A historical summary of the water slide, or major modification as defined in Terminology F747-15, and

1.4.2''A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and major modifications to water slides must qualify as service proven or meet the requirements of this practice.

1.4.3''Service proven or previously compliant designs shall comply with Section 4.