ASTM F406-08a
- standard by ASTM International, 09/01/2008
- Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- Category: ASTM
$83.00
$42.00
Full Description
1.1 This consumer safety specification establishes testing requirements for structural integrity and performance requirements for non-full-size cribs/play yards, both rigid sided and mesh/fabric assemblies. It also provides requirements for labeling and instructional material. The term unit or product will refer to a non-full-size crib/play yard.
1.2 This specification covers a framed enclosure with a floor made for the purpose of providing sleeping and playing accommodations for a child who cannot climb out and is less than 35 in. (890 mm) in height. It also covers bassinet, changing table, or similar attachments to a non-full size crib/play yard. These attachments shall also comply with the applicable requirements of ASTM standards addressing those attachments. For example, a changing table that attaches to a play yard shall also comply with the applicable requirements in Specification F 2388. This specification does not cover inflatable products.
1.3 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1 - This consumer safety specification includes the following sections:
Title | Section |
Scope | 1 |
Referenced Documents | 2 |
ASTM Standards | 2.1 |
Federal Regulations | 2.4 |
Terminology | 3 |
Definitions of Terms Specific to This Standard | 3.1 |
Conspicuous | 3.1.2 |
Cord | 3.1.3 |
Corner Post | 3.1.4 |
Dropside/Dropgate | 3.1.5 |
Dynamic Load | 3.1.6 |
Fabric | 3.1.7 |
Foldable Side or End | 3.1.8 |
Manufacturer's Recommended Use Position | 3.1.9 |
Mattress | 3.1.10 |
Mesh | 3.1.11 |
Mesh/Fabric Crib | 3.1.12 |
Nonpaper Label | 3.1.13 |
Occupant | 3.1.14 |
Paper Label | 3.1.15 |
Protrusion | 3.1.16 |
Rigid Sided Crib | 3.1.17 |
Seam | 3.1.18 |
Static Load | 3.1.19 |
Stationary Side | 3.1.20 |
Structural Failure | 3.1.22 |
Calibration and Standardization | 4 |
General Requirements | 5 |
Scissoring, ShearinProduct Details
Document History ASTM F406-22ASTM F406-19ASTM F406-17ASTM F406-15ASTM F406-12aASTM F406-12ASTM F406-11bASTM F406-11aASTM F406-11ASTM F406-10bASTM F406-10aASTM F406-10ASTM F406-08aASTM F406-08ASTM F406-07ASTM F406-05ASTM F406-04ASTM F406-99ASTM D1555M-00Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metri.. $30.00 $60.00 ASTM D1859-71(2000)Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006).. $25.00 $50.00 ASTM C963-00Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets.. $25.00 $50.00 ASTM F1163-00Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding.. $25.00 $50.00 |