ASTM F593-13ae1

standard by ASTM International, 12/01/2013
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
Category: ASTM

~~$58.00~~ $29.00

Description

Full Description

1.1 This specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

1.2 Seven groups of stainless steel alloys are covered, including thirteen austenitic, two ferritic, four martensitic, and one precipitation hardening.

Group	Alloys^A	Condition^B
1	304, 305, 384, 304 L,	(CW) cold worked^C
	18-9LW, 302HQ^D
2	316, 316 L	(CW) cold worked^C
3	321, 347	(CW) cold worked^C
4	430^E	(CW) cold worked^C
5	410^F	(H) hardened and tempered
6	431	(H) hardened and tempered
7	630	(AH) age hardened

(A) Unless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1).

(B) See 4.2 for options.

(C) Sizes 0.75 in. and larger may be hot worked and solution annealed, provided the bolts comply with the cold worked (CW) mechanical property requirements.

(D) When approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.

(E) When approved by the purchaser, Alloy 430F may be furnished.

(F) When approved by the purchaser, Alloys 416 or 416Se may be furnished.

1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon between the manufacturer and the purchaser at the time of the inquiry and order.

1.4 Suitable nuts for use with bolts, hex cap screws, and studs included in this specification are covered by Specification F594. Unless otherwise specified, all nuts used on these fasteners shall conform to the requirements of Specification F594, shall be of the same alloy group, and shall have a specified minimum proof stress equal to or greater than the specified minimum full-size tensile strength of the externally threaded fast

Product Details

Published:: 12/01/2013
Number of Pages:: 9
File Size:: 1 file , 130 KB
Note:: This product is unavailable in Russia, Ukraine, Belarus

Document History

ASTM F593-13ae1

Full Description

Product Details

ASTM F593-17

ASTM F593-13ae1

ASTM F593-13a

ASTM F593-13

ASTM F593-02(2008)e1

ASTM F593-02(2008)

ASTM F593-02e2

ASTM F593-02e1

ASTM F593-02

ASTM F593-01

ASTM E2148-11

ASTM D4317-98(2011)

ASTM D5591-04(2011)

ASTM Volume 01.01:2011