IEC 60071-1 Ed. 8.0 b:2006

  • standard by International Electrotechnical Commission, 01/23/2006
  • Insulation co-ordination - Part 1: Definitions, principles and rules
  • Category: IEC

$235.00 $118.00

Full Description

Applies to three-phase a.c. systems having a highest voltage for equipment above 1 kV. It specifies the procedure for the selection of the rated withstand voltages for the phase-to-earth, phase-to-phase and longitudinal insulation of the equipment and the installations of these systems. It also gives the lists of the standard withstand voltages from which the rated withstand voltages should be selected. This standard recommends that the selected withstand voltages should be associated with the highest voltage for equipment. This association is for insulation co-ordination purposes only. The requirements for human safety are not covered by this standard. Although the principles of this standard also apply to transmission line insulation, the values of their withstand voltages may be different from the standard rated withstand voltages. The apparatus committees are responsible for specifying the rated withstand voltages and the test procedures suitable for the relevant equipment taking into consideration the recommendations of this standard. NOTE In IEC 60071-2, Application Guide, all rules for insulation co ordination given in this standard are justified in detail, in particular the association of the standard rated withstand voltages with the highest voltage for equipment. When more than one set of standard rated withstand voltages is associated with the same highest voltage for equipment, guidance is provided for the selection of the most suitable set. The main changes from the previous edition are as follows: - in the definitions (3.26, 3.28 and 3.29) and in the environmental conditions (5.9) taken into account clarification of the atmospheric and altitude corrections involved in the insulation co-ordination process; - in the list of standard rated short-duration power frequency withstand voltages reported in 5.6 addition of 115 kV; - in the list of standard rated impulse withstand voltages reported in 5.7, addition of 200 kV and 380 kV; - in the standard insulation levels for range I (1kV

Document History

Amendments, rulings, supplements, and errata

Product Details

Edition:
8.0
Published:
01/23/2006
Number of Pages:
69
File Size:
1 file , 730 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

Document History

IEC 60071-1 Ed. 8.0 b:2006

IEC 60071-1 Ed. 7.0 b:1993

IEC 60287-1-1 Ed. 2.0 b:2006

IEC 60287-1-1 Ed. 2.0 b:2006

Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load..

$139.00 $278.00

IEC 61300-3-10 Ed. 2.0 b:2006

IEC 61300-3-10 Ed. 2.0 b:2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -..

$19.00 $38.00

IEC 61340-3-2 Ed. 2.0 b:2006

IEC 61340-3-2 Ed. 2.0 b:2006

Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) elec..

$24.00 $47.00

IEC 61025 Ed. 2.0 b:2006

IEC 61025 Ed. 2.0 b:2006

Fault tree analysis (FTA)..

$184.00 $367.00